xitanghongda@aliyun.com

+86-510-83396588

Product Categories

Wuxi Xitang Hongda Electromechanical Co.,Ltd

Company:Wuxi Xitang Hongda electromechanical Co.,Ltd. 

Email:xitanghongda@aliyun.com

Phone:+86-510-83396588

Fax:+86-510-83383905

Address:Jiangsu Wuxi Huishan Xitang Village

Home > News > Content
YZ Type Motors Control Requirements Jul 21, 2017

Mainly depending on the specific application of the situation, YZ Type Motors simply to determine: the nature of the load (such as horizontal or vertical load, etc.), torque, inertia, speed, accuracy, acceleration and deceleration requirements, the upper control requirements (such as port interface and communication Aspects of the requirements), the main control mode is the location, torque or speed mode. YZ Type Motors Power supply is DC or AC power, or battery-powered, voltage range. According to which to determine the motor and equipped with the driver or controller model.

In fact, choose what kind of motor should be based on the specific application of the situation, YZ Type Motors each have their own characteristics. Please see the table below, YZ Type Motors naturally understand

Depending on the current of the motor, use a drive greater than or equal to this current. If you need low vibration or high precision, you can use sub-type drive. YZ Type Motors For high torque motors, use high voltage drives as much as possible to achieve good high speed performance. YZ Type Motors Depending on the current of the motor, use a drive greater than or equal to this current. If you need low vibration or high precision, you can use sub-type drive. For high torque motors, use high voltage drives as much as possible to achieve good high speed performance.

2-phase motor cost is low, YZ Type Motors but the vibration at low speed, high speed torque quickly. 5-phase motor vibration is small, high-speed performance is better than the speed of 2-phase motor 30 to 50% higher, in some cases to replace the servo motor.

Brush motor low cost, simple structure, large starting torque, YZ Type Motors wide speed range, easy control, the need for maintenance, but easy maintenance (for carbon brush), resulting in electromagnetic interference, the environment requirements. So it can be used for cost-sensitive general industrial and civilian applications.

Brushless motor small size, light weight, YZ Type Motors the output of large, fast response, high speed, inertia small, smooth rotation, torque stability. Control complex, easy to achieve intelligent, the electronic commutation way flexible, can be square wave commutation or sine wave commutation. Motor maintenance-free, high efficiency, low operating temperature, electromagnetic radiation is very small, YZ Type Motors long life, can be used for a variety of environments.

AC servo motor is also brushless motor, YZ Type Motors divided into synchronous and asynchronous motor, the current motion control are generally used synchronous motor, its power range, you can do a lot of power. High inertia, the highest rotational speed is low, and with the power increases and quickly reduced. YZ Type Motors And thus suitable for low-speed smooth operation of the application.

Brushless motor small size, light weight, the output of large, fast response, YZ Type Motors high speed, inertia small, smooth rotation, torque stability. Control complex, easy to achieve intelligent, the electronic commutation way flexible, can be square wave commutation or sine wave commutation. YZ Type Motors Motor maintenance-free, high efficiency, low operating temperature, electromagnetic radiation is very small, long life, can be used for a variety of environments.

1) Is the power supply voltage appropriate (overvoltage is likely to cause damage to the drive module); for DC input +/- polarity must not be wrong, YZ Type Motors drive the controller model or current set value is appropriate (at the beginning do not Too big);

2) control signal line connected to the industrial site is best to consider the shielding problem (such as the use of twisted pair);

3) Do not start the need to pick up the line all connected, YZ Type Motors only connected into the most basic system, run well, and then gradually connected.

4) must be clear ground method, or the use of floating do not pick up

5) start running within half an hour to closely observe the state of the motor, YZ Type Motors such as whether the movement is normal, sound and temperature rise, find the problem immediately stop adjustment.